User manual

1
1.3 CONNECTIONS OF PLUSII-S-0004
1.3.1 Power supply
The printer is equipped with a 2 pin male connec-
tor terminal block (90°) for the power supply. The
signals on the connector pins are as follows:
Model no. type:
Header: 90° Terminal block
(pitch 5.08mm)
Housing: Terminal block
(AWG 20-14)
PIN SIGNAL DESCRIPTION
1 GND Ground signal
2 +Vin* Logic supply voltage
NOTE
(*) For the electrical specifi cations see Chapter 4.
WARNING
Respect the polarity of the power supply.
(Fig.1.4)
1. INSTALLATION AND USE
1-4 PLUS II User Manual