User manual

3. PRINTER FUNCTIONS
Mini PLUS 3-12
[Default]
[Reference]
[Example]
2n1nAF$B1$
[Name] Print graphic bank ( 384
××
××
× 85 dots).
[Format] ASCII ESC {} n1 n2
Hex 1B FA n1 n2
Decimal 27 250 n1 n2
[Range] 0 ≤ n1, n2 ≤ 255
[Description] Prints the graphics bank from flash.
n1 specifies the starting dot line ( 1 ÷ 85 ).
n2 specifies the number of lines to print.
[Notes] • If n1 + n2 > 85 the printer only prints 85 - n1 + 1 dotlines.
[Default]
[Reference]
[Example] To print the graphic bank from dotline 10 to dotline 40, send:
$1B $FA $0A $1E
n42$D1$
[Name] Set absolute shift into a graphic line.
[Format] ASCII GS $ n
Hex 1D 24 n
Decimal 29 36 n
[Range] 0≤ n ≤ 47
[Description] Set the print beginning position into a graphic line based on the current value of n that
indicate the byte number of shift from left margin.
[Notes] • Settings outside the specified printable area are ignored.
[Default]
[Reference]
[Example]
n94$D1$
[Name] Transmit printer ID.
[Format] ASCII GS I n
Hex 1D 49 n
Decimal 29 73 n
[Range] 1 ≤ n ≤ 3, 49 ≤ n ≤ 51
[Description] Transmits the printer ID specified by n follows:
netnapmatsDIacificepS
94,1domenoizacifitnedI.etnapmatsB1$
05,2otazzilitunoN00$usossiF
15,3MORenoisrevenoizacifitnedI )rac4(MORenoisrevalladednepiD
[Notes] • This command is executed when the data is processed in the data buffer. Therefore,
there could be a time lag between command reception and data transmission, depending
on data buffer status.