User manual

3. PRINTER FUNCTIONS
Mini PLUS3-11
$30, $32
it means that printing is in double height mode
17$B1$
[Name] Disables underlined printing
[Format] ASCII ESC q
Hex 1B 71
Decimal 27 113
[Description] Annuls underlined printing
[Notes]
[Default]
[Reference] $1B $51
[Example]
37$B1$
[Name] Transmits the next character in serial
[Format] ASCII ESC s
Hex 1B 73
Decimal 27 115
[Description] Transmits the next character it receives on the serial port
[Notes]
[Default]
[Reference]
[Example] If you transmit: $1B $73 $41
the last character, A, will not be printed but immediately transmitted on the serial line
67$B1$
[Name] Transmit paper sensor status
[Format] ASCII ESC v
Hex 1B 76
Decimal 27 118
[Description] When this command is received, transmit the current status of the paper sensor.
[Notes] • This command is executed immediately, even when the data buffer is full (Busy ).
The status to be transmitted is shown in the table below:
tiBnO/ffOxeHlamiceDnoitcnuF
01,ffO000 tneserprepaP
nO03 3 gnikrowtonrosnesrepaP
3,2ffO000 :rosnesdne-repaP
tneserprepaP
nOC021:rosnesdne-repaP
tneserptonrepaP
4ffO000 .ffOotdexiF.desutoN
5ffO000 tcerrocerutarepmetdaeH
nO0223rorreerutarepmetdaeH
6ffO000 tcerrocegatlovylppuS
nO0446rorreegatlovylppuS
7ffO000 .ffOotdexiF.desutoN