User manual

3. PRINTER FUNCTIONS
Mini PLUS 3-10
where :
$1B, ‘N’ (sets the printing in normal mode )
$1B, ‘c’, (bar code printing command)
‘C’, (barcode type = Code 39)
$50, (barcode heigth = 10 mm)
$3C, (starting position = 7,5 mm)
$14, (HRI printing below, barcode width double)
$04, (characters number to print)
‘PLUS’ (characters to print)
[Notes]
[Default]
[Reference]
[Example]
86$B1$
[Name] Selects 42 columns
[Format] ASCII ESC h
Hex 1B 68
Decimal 27 104
[Description] On receiving this command, the printer enters 42-column per line printing mode.
[Notes]
[Default]
[Reference] $1B $49, $1B $69
[Example]
96$B1$
[Name] Selects 40 columns
[Format] ASCII ESC i
Hex 1B 69
Decimal 27 105
[Description] On receiving this command, the printer enters 40-column per line printing mode.
[Notes]
[Default]
[Reference] $1B $49, $1B $68
[Example]
D6$B1$
[Name] Transmits the print mode in serial
[Format] ASCII ESC m
Hex 1B 6D
Decimal 27 109
[Description] Transmits the print mode configuration on the serial port
[Notes] • If the printer is using the parallel protocol, nothing with be transmitted
[Default] Setting in the option register by means of the front keys
[Reference]
[Example] The response is on two bytes. E.g. if you receive: