User manual

3. PRINTER FUNCTIONS
Mini PLUS3-9
[position] Left hand margin, expressed in 1/8 mm. units
[options] Specify the bar code options trough a byte. In the following tables are listed
alls the possibles values of single bit inside of byte :
0tiBnoitcnuFnoitpircseD
0detnirptonsitigidkcehC
tigidkcehC
1detnirpsitigidkcehC
1tiBnoitcnuFnoitpircseD
-desutoN-
3tiBtiB2 noitcnuFnoitpircseD
00 oN
noitisopIRH
01 evobA
10 woleB
11 woleb&evobA
5tiBtiB4 noitcnuFnoitpircseD
00 lamroN
htdiwedocraB
01 elbuoD
10 elpirT
11 desutoN
tiBnoitcnuFnoitpircseD
6desutoN-
7desutoN-
[length] Specify the characters number to print trough a byte; in
following are listed the maximum lenghts allowed :
Interleaved 2/5 = 12 characters
Code 39 = 10 characters
CodaBar = 10 characters
EAN8 = 7 characters
EAN13 = 12 characters
[data] Specify the characters to print expressed in ASCII
[Notes] • For EAN8 and EAN13 barcodes the check digit is automatic.
• When CODE 39 barcode is used with triple width function, if 6 characters + check digit
are sent the print limits are exceeded, so the barcode can’t be printed.
[Default]
[Reference]
[Example] In the following example is indicated the command sequence to print a barcode :
$1B, ‘N’, $1B, ‘c’, ‘C’, $50, $3C, $14, $04, ‘PLUS’