User manual

3. PRINTER FUNCTIONS
Mini PLUS3-1
PLUS
Small panel printer
Reverse mode
Normal mode
P
L
U
S
S
m
a
l
l
p
a
n
e
l
p
r
i
n
t
e
r
P
A
P
E
R
O
U
T
F
E
E
D
D
I
R
E
C
T
I
O
N
3.1 PRINT DIRECTION
The printer has two printing directions which can be selected by means of the control characters: normal and
reverse.
(Fig.3.1)
3.2 CONTROL CHARACTERS
LEGEND :
Symbol Function
$ indicates the representation of the command hexadecimal value (for example $40 means HEX
40).
{ } indicates an ASCII character not performable.
n, m, t, x, y are additionals/optional parameters that can have different values.
The command table lists all the commands for the management of the printer functions. The commands can be
transmitted to the printer at any moment, but they will only be carried out when the characters previously
transmitted have been printed or the commands previously transmitted have been carried out. There are no
commands with priority status; all the commands are carried out when the circular buffer is free to do so.
COMMAND TABLE (Table 3.1)
HEX ASCII Description Note
$00 Prints in small characters
$01 Prints in double width
$02 Prints in double height
$03 Expanded printing
$04 Restores small character printing
$0A Forward feeds one line
(n) $0B Forward feeds (n) line