User manual

Unlock the control board position pushing in the direction indicated by the arrow as shown in fi g. A.4.•
Extract the control board from its seating in the direction indicated by the arrow as shown in fi g. A.5.•
3
NEAR PAPER
END
FF
LF
STATUS
4
NEAR PAPER
END
FF
LF
STATUS
The fuse is on the control board of the printer, near the supply connector (fi g A.6). Unsolder the fuse at his •
end, paying attention to not heat excessively the closed components, to not take any risk to damage it.
Replace the fuse with a new one with same specifi cations (5A, 60Vdc) and place it again in its seating.•
Reassemble • the control board on the printer using these instructions in reverse order.
5
(Fig.A.5)(Fig.A.4)
(Fig.A.6)
APPENDIX A - ACCESSORIES AND SPARE PARTS
A-4 KPM150 User Manual