User manual

4.2 CHARACTER SETS IN SVELTA EMULATION
In SVELTA emulation the printer has 20 embedded fonts of varying width which may be accessed through
control characters (see commands description in SVELTA emulation of Command Reference). The following
list shows the font availables and relative dimensions in dot:
Font HEL8PT8 •
(A)
Proportional Font with fi xed height (H = 28 dot)
Font HEL10PT8 •
(A)
Proportional Font with fi xed height (H = 34 dot)
Font HEL14PT8 •
(A)
Proportional Font with fi xed height (H = 50 dot)
Font HEL16PT8 •
(A)
Proportional Font with fi xed height (H = 55 dot)
Font 18x24 (Font 18x24 in ESC/POS emulation)•
Font 14x24 (Font 14x24 in ESC/POS emulation)•
Font 10x24 (Font 10x24 in ESC/POS emulation)•
Font 8x12 •
(B)
Fixed Font
Font 8x12-2 •
(B)
Fixed Font
Font 12x12 •
(B)
Fixed Font
Font 14x11 •
(B)
Fixed Font
Font 16x24 •
(B)
Fixed Font
Font 16x24_1 •
(B) (C)
Fixed Font
Font 16x24_2 •
(B) (C)
Fixed Font
Font 20x15 •
(B)
Fixed Font
Font 28x20 •
(B)
Fixed Font
Font 14x24_1 •
(B) (C)
Fixed Font
Font 16x24CN •
(B) (C)
Fixed Font
Font OCRB (20x32) •
(B)
Fixed Font
For further informations to characters representations print directly the Font Test
(D)
.
NOTE:
(A)
A proportional font is a font in which different characters have different pitches
(widths).
(B)
A fi xed font is the opposite of a proportional font and is a fi xed-pitch font.
(C)
The fonts with the same name and dimension contain different characters in different
positions from theirs.
(D)
During power-up, if the FORM FEED (FF) key is held down, the printer executes the
FONT TEST.
4. CHARACTER SETS
4-2 KPM150 User Manual