User manual

3.1 TECHNICAL SPECIFICATIONS
Table 3.1 gives the main technical specifi cations for the printer model.
Standard interfaces USB 2.0 Full Speed RS232
Communication speed 12 Mbit/sec from 1200 to 115200 bps
Resolution 204 DPI (8 dot/mm)
Paper specifi cations
Type of paper
Thermal rolls Heat-sensitive side on outside of roll
Fan Fold thermal paper with notch
Paper width from 20mm to 54mm (step di 2mm)
Recommended types of
paper
from 80 g/m
2
to 180 g/m
2
External roll diameter max Ø180 mm
(1)
Internal roll core diameter min 50 mm (+1 mm)
Core thickness 2 mm (+1 mm)
Paper end Not attached to roll core
Core type Cardboard or plastic
Sensors
Ticket presence, head temperature, black mark detector in 3 positions and
translucent gap/hole mark detector (setting by software),
ticket presence on output, cover open, external near paper end.
Printing method Thermal, fi xed head (8 dot/mm)
Printing mode Normal, 90°, 180°, 270°
Printing format Height/Width from 1 to 8, bold, reverse, underlined, italic
Character fonts
ESC/POS
TM
emulation: PC437, PC850, PC860, PC863, PC865, PC858, PC866
SVELTA emulation: 20 embedded fonts
KPM54 emulation: PC437
Receive buffer 2 Kbytes
Flash memory 1 Mbytes + 128 Kbytes
Graphic memory Logos dynamic management (max 32KB graphics memory)
Printing speed
Normal
High speed
120 mm/sec
160 mm/sec
Head life 50 Km / 100M pulses
MCBF 1 000 000 cutter number
MTBF
(2)
400 000 hours
Mechanical Characteristics
Dimensions
Length [mm] =
Height [mm] =
Width [mm] =
171
122 (with cover closed)
114
Weight [gr.] 1850 (without paper roll)
Electrical input
Power supply 24 Vdc ± 10%
Average
(8)
0.7 A
Stand-by 70 mA
(Tab.3.1)
3. TECHNICAL SPECIFICATIONS
User Manual KPM150 3-1