User manual

1.5.2 Specifi cations for ticket with gap
The printer manages tickets with lateral gap. Set the “Notch position” parameter (see printer setup) with
“Transparent side” value for print and cut the ticket. Fig.1.7 shows an example for ticket with lateral gap.
7
3
3
Side gap
Ticket margin
Sensor axis
where
L = represents the paper width used (20 ÷ 54mm);
H = indicates the managed minimum height (2mm)
D = indicates the minimum width (10mm)
1.6 MAINTENANCE
1.6.1 Changing the paper roll
To change the paper roll proceed as follows:
Position the paper roll so that it unrolls in the direction shown in fi g.1.8.1.
Insert the paper into the paper infeed opening and wait for it to load automatically (see fi g.1.9).2.
Fig.1.9 gives alignment specifi cations for correct paper loading.
(Fig.1.7)
1. INSTALLATION AND USE
1-6 KPM150 User Manual