Specifications

• In the $10 $04 n command, with n = 17, the fourth bit of the returned byte, identiﬁ es that

the notch alignment procedure is in running, while the seventh bit points out a possible

timeout error of marker research.

• Once the ticket is aligned at the notch, the motor performs m steps deﬁ ned by $1D $F7

command.

[Default]

[Reference] $10 $04, $1D $F7

[Example]

$1D $F7

Printers: KPM150

[Name] Set the shifting of the motor after the alignment

[Format] ASCII GS { } nH nL

Hex 1D F7 nH nL

Decimal 29 247 nH nL

[Range] 0 ≤ nH ≤ 255

0 ≤ nL ≤ 255

[Description] This command sets the shifting of the motor after the alignment at the notch.

[Notes] • The dotlines number to make performs at the motor is obtained from:

[nL + (nH × 256)]

• When the motor must turns is the opposite verse to the printing direction, use the com-

plement of 65536 : nL + nH × 256 = 65536 – N

[Default] nH = nL = 0

[Reference]

[Example]

KPM54 Emulation

Command Reference 97