Specifications

• The printer prints an HRI character ( n ) as a control character ( $00 to $1F and $7F).
When CODE128 is used:
• When using CODE128 in this printer, please note the following regarding data transmis-
sion:
• The top part of the bar code data string must be a code set selection character (CODE
A, CODE B or CODE C) which selects the fi rst code set.
• Special characters are defi ned by combining two characters “{“ and one character. ASCII
character “{” is defi ned by transmitting “{“ twice, consecutively.
SPECIFIC
CHARACTER
DATA TRANSMISSION
ASCII HEX Decimal
SHIFT {S 7B, 53 123, 83
CODE A {A 7B, 41 123, 65
CODE B {B 7B, 42 123, 66
CODE C {C 7B, 43 123, 67
FNC1 {1 7B, 31 123, 49
FNC2 {2 7B, 32 123, 50
FNC3 {3 7B, 33 123, 51
FNC4 {4 7B, 34 123, 52
‘{‘ {{ 7B, 7B 123, 123
[Default]
[Reference] $1D $48, $1D $66, $1D $68, $1D $77
[Example]
$1D $72
Printers: KPM150
[Name] Transmit status
[Format] ASCII GS r n
Hex 1D 72 n
Decimal 29 114 n
[Range] n = 1, 49
[Description] Transmits the status specifi ed by n as follows:
n FUNCTION
1, 49 Transmits paper sensor status (as for $1B $76).
Paper sensor status (n = 1, 49):
BIT OFF/ON HEX Decimal FUNCTION
0, 1
Off 00 0 Near paper end sensor: paper present
On 03 3 Near paper end sensor: paper not present
2,3
Off 00 0 Paper end sensor: paper present
On (0C) (12) Paper end sensor: paper not present
4 Off 00 0 Not used. Fixed to Off
5 - - - Undefi ned
6 - - - Undefi ned
7 Off 00 0 Not used. Fixed to Off
[Notes] • This command is executed when the data is processed in the data buffer. Therefore,
there may be a time lag between receiving the command and transmitting the status,
depending on data buffer status.
[Default]
[Reference] $10 $04, $1B $76
[Example]
KPM54 Emulation
92 Command Reference