Specifications

[Description] Selects a bar code system and prints the bar code. m selects a bar code system as follows:
n
m BARCODE SYSTEM No. OF CHARACTERS REMARKS
0 UPC-A 11≤ k ≤12 48≤ d ≤ 57
1 UPC-E 11≤ k ≤12 48≤ d ≤ 57
2 EAN13 ( JAN) 12≤ k ≤13 48≤ d ≤ 57
3 EAN8 ( JAN) 7≤ k ≤8 48≤ d ≤ 57
4 CODE39 1≤ k
48 ≤ d ≤ 57,65 ≤ d ≤ 90, 32,
36, 37, 43, 45, 46, 47
5 ITF 1≤ k (even number) 48 ≤ d ≤ 57
6 CODABAR 1≤ k
48 ≤ d ≤ 57, 65 ≤ d1 ≤ 68, 36,
43, 45, 46, 47, 58
7 CODE93 1≤ k ≤255 1≤ d ≤ 127
8 CODE128 2≤ k ≤255 1≤ d ≤ 127
20 CODE32 8≤ k ≤9 48≤ d ≤ 57
o
65 UPC-A 11≤ n ≤12 48≤ d ≤ 57
66 UPC-E 11≤ n ≤12 48≤ d ≤ 57
67 EAN13 ( JAN) 12≤ n ≤13 48≤ d ≤ 57
68 EAN8 ( JAN) 7≤ n ≤8 48≤ d ≤ 57
69 CODE39 1≤ n ≤ 255
48 ≤ d ≤ 57, 65 ≤ d ≤ 90, 32,
36, 37, 43, 45, 46, 47
70 ITF 1≤ n ≤255 48≤ d ≤ 57
71 CODABAR 1≤ n ≤ 255
48 ≤ d ≤ 57, 65 ≤ d1 ≤ 68, 36,
43, 45, 46, 47, 58
72 CODE93 1≤ n ≤255 0≤ d ≤ 127
73 CODE128 2≤ n ≤255 0≤ d ≤ 127
90 CODE32 8≤ n ≤9 48≤ d ≤
57
[Notes] • If d is outside of the specifi ed range, the printer prints the following message: “BAR CODE
GENERATOR IS NOT OK!” and processes the data which follows as normal data.
• If the horizontal size exceeds the printing area, the printer only feeds the paper.
• This command feeds as much paper as is required to print the bar code, regardless of
the line spacing specifi ed by $1B $32 or $1B $33.
• After printing the bar code, this command sets the print position to the beginning of the
line.
• This command is not affected by print modes (emphasized, double-strike, underline or
character size), except for upside-down and justifi cation mode.
[Notes per n] • This command ends with a NUL code.
• When the bar code system used is UPC-A or UPC-E, the printer prints the bar code data
after receiving 11 (without check digit) or 12 (with check digit) bytes bar code data.
• When the bar code system used is EAN13, the printer prints the bar code data after
receiving 12 (without check digit) or 13 (with check digit) bytes bar code data.
• When the bar code system used is EAN8, the printer prints the bar code data after
receiving 7 (without check digit) or 8 (with check digit) bytes bar code data.
• The number of data for ITF bar code must be even numbers. When an odd number of
data is input, the printer ignores the last received data.
[Notes per o] • If n is outside of the specifi ed range, the printer stops command processing and proc-
esses the following data as normal data.
When CODE93 is used:
• The printer prints an HRI character ( o ) as a start character at the beginning of the HRI
character string.
• The printer prints an HRI character ( o ) as a stop character at the end of the HRI char-
acter string.
KPM54 Emulation
Command Reference 91