Specifications

• In count-down mode, if the counter value set by this command goes out of the counter
operation range set by $1D $43 $31 or $1D $43 $3B; it is forced to revert to the maximum
value.
[Default]
[Reference] $1D $43 $30, $1D $43 $31, $1D $43 $32, $1D $43 $3B
[Example]
$1D $66
Printers: KPM150
[Name] Select font for HRI characters
[Format] ASCII GS f n
Hex 1D 66 n
Decimal 29 102 n
[Range] n = 0, 1, 48, 49
[Description] Selects a font for the HRI characters used when printing a bar code. n selects a font from
the following table:
n FONT
0, 48 Font A (14x24)
1, 49 Font B (10x24)
[Notes] HRI characters are printed at the position specifi ed by $1D $48.
[Default] n = 0
[Reference] $1D $48, $1D $6B
[Example]
$1D $68
Printers: KPM150
[Name] Set barcode height
[Format] ASCII GS h n
Hex 1D 68 n
Decimal 29 104 n
[Range] 1 ≤ n ≤ 255
[Description] Sets the height of the barcode. n specifi es the number of vertical dots.
[Notes]
[Default] n = 96 (12 mm )
[Reference] $1D $6B
[Example]
n $1D $6B, o $1D $6B
Printers: KPM150
[Name] Print bar code
[Format] n ASCII GS k m NUL
Hex 1D 6B m 00
Decimal 29 107 m 0
o ASCII GS k m n
Hex 1D 6B m n
Decimal 29 107 m n
[Range] n 0 ≤ m ≤ 6
‚ o 65 ≤ m ≤ 73
KPM54 Emulation
90 Command Reference