Specifications

[Notes]
[Default] n = 0
[Reference] See character code tables, $1C $65, $1C, $66
[Example]
$1B $76
Printers: KPM150
[Name] Transmit paper sensor status
[Format] ASCII ESC v
Hex 1B 76
Decimal 27 118
[Range]
[Description] When this command is received, transmit the current status of the paper sensor.
[Notes] • This command is executed immediately, even when the data buffer is full (Busy ). The
status to be transmitted is shown in the table below:
BIT OFF/ON HEX Decimal FUNCTION
0,1
Off 00 0 Not used.
On 03 3 Not used.
2,3
Off 00 0 Paper-end sensor: paper present
On (0C) (12) Paper-end sensor: paper not present
4 Off 00 0 Not used. Fixed to Off
5 - - - Undefi ned
6 - - - Undefi ned
7 Off 00 0 Not used. Fixed to Off
[Default]
[Reference] $10 $04
[Example]
$1B $78
Printers: KPM150
[Name] Select speed /current mode
[Format] ASCII ESC x n
Hex 1B 78 n
Decimal 27 120 n
[Range] 0 ≤ n ≤ 1
[Description] Selects printing speed / current mode.
n FUNCTION
0 Low current
1 Normal mode
[Notes] • If the printer shows some problems while printing, select mode 0 (low current).
[Default] n = 1
[Reference]
[Example]
KPM54 Emulation
Command Reference 81