Specifications

$0D

Printers: KPM150

[Name] Print and carriage return

[Format] ASCII CR

Hex 0D

Decimal 13

[Description] When autofeed is “CR enabled”, this command functions in the same way as $0A, oth-

erwise it is disregarded.

[Notes] • Sets the print position to the beginning of the line.

[Default] See “Autofeed in setup” parameter.

[Reference] $0A

[Example]

$10 $04 n

Printers: KPM150

[Name] Real-time status transmission

[Format] ASCII DLE EOT n

Hex 10 04 n

Decimal 16 4 n

[Range] 1 ≤ n ≤ 4, n = 17, n = 20, n=21

[Description] Transmits the selected printer status speciﬁ ed by n in real time according to the following

parameters:

n = 1 transmit printer status

n = 2 transmit off-line status

n = 3 transmit error status

n = 4 transmit paper roll sensor status

n = 17 transmit print status

n = 20 transmit FULL STATUS

n = 21 transmit printer ID

[Notes] • This command is executed when the data buffer is full.

• This status is transmitted whenever data sequence $10 $04 is received.

[Default]

[Reference] See tables below.

[Example] n=1: Printer status

BIT OFF/ON HEX Decimal FUNCTION

0 Off 00 0 Not used. Fixed to Off

1 On 02 2 Not used. Fixed to On

2 Off 00 0 Not used. Fixed to Off

Off 00 0 On-line.

On 08 8 Off-line.

4 On 10 16 Not used. Fixed to On

5 - - - RESERVED

Off 00 0- LF key released

On 40 64 LF key pressed

Off 00 0 FF key released

On 80 128 FF key pressed

ESC/POS™ Emulation

8 Command Reference