Specifications

BIT OFF/ON HEX Decimal FUNCTION
0
Off 00 0 Printer Disabled
On 01 1 Printer Enabled
1 - - - Undefi ned.
2 - - - Undefi ned.
3 - - - Undefi ned.
4 - - - Undefi ned.
5 - - - Undefi ned.
6 - - - Undefi ned.
7 - - - Undefi ned.
[Notes] • When the printer is disabled, it ignores all transmitted data until the printer is enabled
through this command.
[Default] n = 1
[Reference]
[Example]
$1B $3F
Printers: KPM150
[Name] Cancel user-defi ned characters
[Format] ASCII ESC ? n
Hex 1B 3F n
Decimal 27 63 n
[Range] 32 ≤ n ≤ 126
[Description] Cancels user-defi ned characters.
[Notes] • This command cancels the pattern defi ned for the character code specifi ed by n. After the
user-defi ned character is cancelled, the corresponding pattern for the internal character
is printed.
• This command deletes the pattern defi ned for the specifi ed character code in the font
selected by $1B $21.
• If the user-defi ned character has not been defi ned for the specifi ed character code, the
printer ignores this command.
[Default]
[Reference] $1B $26, $1B $25
[Example]
$1B $40
Printers: KPM150
[Name] Initialize printer
[Format] ASCII ESC @
Hex 1B 40
Decimal 27 64
[Range]
[Description] Clears the data in the print buffer and resets the printer mode to that in effect when power
was turned on.
[Notes] • The data in the receiver buffer is not cleared.
• The macro defi nitions are not cleared.
[Default]
[Reference]
[Example]
KPM54 Emulation
Command Reference 75