Specifications

$1B $33
Printers: KPM150
[Name] Set line spacing
[Format] ASCII ESC 3 n
Hex 1B 33 n
Decimal 27 51 n
[Range] 0 ≤ n ≤ 255
[Description] Sets line spacing to [ n × (vertical or horizontal motion unit)] inches.
[Notes] • The horizontal and vertical motion unit are specifi ed by $1D $50. Changing the horizontal
or vertical motion unit does not affect the current line spacing.
• The $1D $50 command can change the horizontal (and vertical) motion unit. However,
the value cannot be less than the minimum vertical movement amount.
• In standard mode, the vertical motion unit is used.
• The maximum spacing is n = 255 (~ 32 mm).
[Default] n = 32 (1/6 inch)
[Reference] $1B $30, $1B $32, $1D $50
[Example]
$1B $34
Printers: KPM150
[Name] Set/reset italic mode
[Format] ASCII ESC 4 n
Hex 1B 34 n
Decimal 27 52 n
[Range] 0 ≤ n ≤ 1, 48 ≤ n ≤ 49
[Description] Turns italic mode on or off, based on the following values of n:
n FUNCTION
0, 48 Turns off italic mode
1, 49 Turns on italic mode
[Notes] • The printer can print any character in italic mode.
• When italic mode is turned off by setting the value of n to 0 or 48, the data which follows
is printed in normal mode.
• Italic mode can also be turned on or off using $1B $21. Note, however, that the last
received command is the effective one.
[Default] n = 0
[Reference] $1B $21
[Example]
$1B $3D
Printers: KPM150
[Name] Select peripheral device
[Format] ASCII ESC = n
Hex 1B 3D n
Decimal 27 61 n
[Range] 0 ≤ n ≤ 255
[Description] Select the device to which the host computer sends data, using n as follows:
KPM54 Emulation
74 Command Reference