Specifications

3
Off 00 0 Cutter motor off.
On 08 8 Cutter motor on.
4 On 10 16 Not used. Fixed to On.
5 Off 00 0 Not used. Fixed to Off.
6
Off 00 0 Paper present.
On 40 64 Virtual paper-end.
7 Off 00 0 Not used. Fixed to Off.
$18
Printers: KPM150
[Name] Cancel print data buffer
[Format] ASCII CAN
Hex 18
Decimal 24
[Description] Deletes all the print data in the current print buffer.
[Notes] This command set the print position to the beginning of the line
[Default]
[Reference]
[Example]
$1B $20
Printers: KPM150
[Name] Set right-side character spacing
[Format] ASCII ESC SP n
Hex 1B 20 n
Decimal 27 32 n
[Range] 0 ≤ n ≤ 255
[Description] Sets the character spacing for the right side of the character to [n x horizontal or vertical
motion units].
[Notes] • The right character spacing for double-width mode is twice the normal value.
When the characters are enlarged, the right side character spacing is m (2 or 4) times
the normal value.
• The horizontal and vertical motion units are specifi ed by $1D $50. Changing the hori-
zontal or vertical motion units does not affect the current right side spacing.
• The $1D $50 command can change the horizontal (and vertical) motion unit. However,
the value cannot be less than the minimum horizontal movement amount.
• In standard mode, the horizontal motion unit is used.
• The maximum right side spacing is 225/200 inches.
[Default] n = 0
[Reference] $1D $50
[Example]
KPM54 Emulation
68 Command Reference