Specifications

n=2: Off-line status
BIT OFF/ON HEX Decimal FUNCTION
0 Off 00 0 Not used. Fixed to Off
1 On 02 2 Not used. Fixed to On
2 Off 00 0 Not used. Fixed to Off
3
Off 00 0 Paper isn’t fed by FEED. key
On 08 8 Paper is fed by FEED. key
4 On 10 16 Not used. Fixed to On
5
Off 00 0 Paper present
On 20 32 Printing stop due to paper end
6
Off 00 0 No error
On 40 64 Error
7 Off 00 0 Not used. Fixed to Off
n=3: Error status
BIT OFF/ON HEX Decimal FUNCTION
0 Off 00 0 Not used. Fixed to Off
1 On 02 2 Not used. Fixed to On
2 Off 00 0 Not used. Fixed to Off
3
Off 00 0 Cutter ok
On 08 8 Cutter error
4 On 10 16 Not used. Fixed to On
5
Off 00 0 No unrecoverable error.
On 20 32 Unrecoverable error occurs (cutter, memory).
6
Off 00 0 No auto-recoverable error
On 40 64 Auto-recoverable error
7 Off 00 0 Not used. Fixed to Off
n=4: Paper roll sensor status
BIT OFF/ON HEX Decimal FUNCTION
0 Off 00 0 Not used. Fixed to Off
1 On 02 2 Not used. Fixed to On
2,3
Off 00 0 Paper present..
On 0C 12 Near paper end.
4 On 10 16 Not used. Fixed to On
5, 6 On 60 96 Fixed to On. Paper end is detected by the paper end sensor.
7 Off 00 0 Not used. Fixed to Off
n=17: Print status
BIT OFF/ON HEX Decimal FUNCTION
0 Off 00 0 Not used. Fixed to Off
1 On 02 2 Not used. Fixed to On
2
Off 00 0 Paper drag motor off
On 04 4 Paper drag motor on
3
Off 00 0 Alignment not in running.
On 08 8 Ticket alignment in running.
4 On 10 16 Not used. Fixed to On
5
Off 00 0 Paper present
On 20 32 Printing is interrupted for paper-end.
6
Off 00 0 Alignment correct.
On 40 64 Notch research timeout.
KPM54 Emulation
Command Reference 65