Specifications

$0D
Printers: KPM150
[Name] Print and carriage return
[Format] ASCII CR
Hex 0D
Decimal 13
[Range]
[Description] When autofeed is “CR enabled”, this command functions in the same way as $0A, oth-
erwise it is disregarded.
[Notes] • Sets the print position to the beginning of the line.
[Default] See “Autofeed in setup” parameter.
[Reference] $0A
[Example]
$10 $04
Printers: KPM150
[Name] Real-time status transmission
[Format] ASCII DLE EOT n
Hex 10 04 n
Decimal 16 4 n
[Range] 1 ≤ n ≤ 4, n = 17, 32 ≤ n ≤ 34
[Description] Transmits the selected printer status specifi ed by n in real time according to the following
parameters:
n = 1 transmit printer status
n = 2 transmit off-line status
n = 3 transmit error status
n = 4 transmit paper roll sensor status
n = 17 transmit print status
n = 20 transmit FULL status
n = 21 transmit printer sensors status
n = 22 transmit buttons status
n = 23 transmit motors status
[Notes] • Immediately executed even when the data buffer is full.
• This status is transmitted whenever data sequence $10 $04 n is received.
[Default]
[Reference] See tables below.
[Example]
n=1: Printer status
BIT OFF/ON HEX Decimal FUNCTION
0 Off 00 0 Not used. Fixed to Off
1 On 02 2 Not used. Fixed to On
2 Off 00 0 Not used. Fixed to Off
3
Off 00 0 On-line.
On 08 8 Off-line.
4 On 10 16 Not used. Fixed to On
5 - - - RESERVED
6 - - - RESERVED
7 Off 00 0 Not used. Fixed to Off
KPM54 Emulation
64 Command Reference