Specifications

$1B $2A ESC * Select image print mode
STATUS COMMANDS
$10 $04 DLE EOT Real-time status transmission
$1B $76 ESC v Transmit paper sensor status
$1D $72 GS r Transmit status
$1D $E1 GS { } Reading of length paper (cm) available before virtual paper end
$1D $E2 GS { } Reading number of cuts performed from the printer
$1D $E3 GS { } Reading of length (cm) of printed paper
$1D $E5 GS { } Reading number of power up
BARCODE COMMANDS
$1D $48 GS H Select printing position of HRI characters
$1D $66 GS f Select font for HRI characters
$1D $68 GS h Select barcode height
$1D $6B GS k Print barcode
$1D $77 GS w Select barcode width
MACRO FUNCTION COMMANDS
$1D $3A GS : Set start/end of macro defi nition
$1D $5E GS ^ Execute macro
MECHANISM CONTROL COMMANDS
$1B $69 ESC i Total cut
MISCELLANEOUS COMMANDS
$1B $3D ESC = n Select peripheral device
$1B $40 ESC @ Initialize printer
$1B $63 $35 ESC c 5 Enable/Disable front panel keys
$1B $78 ESC x Select speed / current mode
$1D $43 $30 GS C 0 Select counter print mode
$1D $43 $31 GS C 1 Select count print mode (A)
$1D $43 $32 GS C 2 Set counter
$1D $43 $3B GS C ; Select count print mode (B)
$1D $49 GS I Transmit printer ID
$1D $50 GS P Set horizontal and vertical motion units
$1D $63 GS c Print counter
$1D $E6 GS { } Virtual paper end limit
TICKET MANAGEMENT COMMANDS
$1D $7C GS { } Set printing density
$1D $F2 GS { } Set the discrimination level of the alignment notch
$1D $F3 GS { } Return the discrimination levels of the notch
$1D $F6 GS { } Ticket align at notch
$1D $F7 GS { } Set the shifting of the motor after the alignment
KPM54 Emulation
62 Command Reference