Specifications

$1D $72 GS r Transmit status
$1D $E0 GS { } Enable / disable automatic FULL STATUS back
$1D $E1 GS { } Reading of length paper (cm) available before virtual paper end
$1D $E2 GS { } Reading number of cuts performed from the printer
$1D $E3 GS { } Reading of length (cm) of printed paper
$1D $E4 GS { } Reading number of retracting
$1D $E5 GS { } Reading number of power up
BARCODE COMMANDS
$1D $48 GS H Select printing position of HRI characters
$1D $66 GS f Select font for HRI characters
$1D $68 GS h Select barcode height
$1D $6B GS k Print barcode
$1D $77 GS w Select horizontal size (enlargement) of barcode
MECHANISM CONTROL COMMANDS
$1B $69 ESC i Total cut
$1C $C1 FS { } Paper recovery after cut
$1D $56 GS V Select cut mode
MISCELLANEOUS COMMANDS
$1B $3D ESC = Select peripherals device
$1B $40 ESC @ Initialize printer
$1B $63 $35 ESC c 5 Enable/Disable front panel keys
$1B $78 ESC x Select speed / quality mode
$1C $3C FS < Change printer emulation to SVELTA
$1C $C0 FS { } Hardware reset
$1D $49 GS I Transmit printer ID
$1D $50 GS P Set horizontal and vertical motion units (mode 1)
$1D $70 GS p Print logo
$1D $E6 GS { } Virtual paper end limit
TICKET MANAGEMENT COMMANDS
$1C $73 FS s Enable / disable current ticket
$1D $7C GS { } Set printing density
$1D $E7 GS { } Set notch distance
$1D $F0 GS { } Set printing speed
$1D $F6 GS { } Ticket align at print
$1D $F8 GS { } Ticket align at cut
ESC/POS™ Emulation
6 Command Reference