Specifications

7: Font dimension ×7

8: Font dimension ×8

[Notes] The command is ignored if height or width has different value from that reported above.

[Default]

[Reference]

[Example]

<IT>

Printers: KPM150

[Name] Invalidate the ticket

[Format] ASCII <IT>

[Range]

[Description] When this command is received, the current ticket is invalid.

[Notes]

[Default]

[Reference] <VT>

[Example]

Printers: KPM150

[Name] Enable/Disable keys panel

[Format] ASCII <KEYS x>

[Range] x = 0, 1

[Description] Enables / disables the keys panel.

• When x = 0, the keys panel is enabled.

• When x = 1, the keys panel is disabled.

[Notes] • When the keys panel is disabled, the keys may only be used after the printer has been

reset.

[Default] n = 0

[Reference]

[Example]

Printers: KPM150

[Name] Set ticket dimension to print

[Format] ASCII <LHT length, height, notch, dimnotch>

[Range]

[Description] Sets the ticket dimension to print in the following mode:

lenght is the ticket length (in dot);

height is the ticket height (in dot);

notch is the distance (in dot) between the ticket upper edge and strobe backside preprinted

black mark;

dimnotch is the notch dimension (in dot).

[Notes] • If using the point (.) character as decimal separator instead of commas then the passed

value are stored in EEProm.

• 1mm = 8 dot.

[Default]

[Reference]

[Example]

SVELTA Emulation

48 Command Reference