Specifications

[Reference] <OXY x, y>

[Example] Ticket example that use a ﬁ lled box

<BF800,50,1000,250>

<q>

(800, 50)

(1000, 250)

Printers: KPM150

[Name] Command to create empty Box

[Format] ASCII <BF x1,y1,x2,y2>

[Range]

[Description] Create an empty box on the basis of x1, y1, x2, y2 coordinates where :

x1 -> minimum horizontal coordinate

y1 -> minimum vertical coordinate

x2 -> maximum horizontal coordinate

y2 -> maximum vertical coordinate

[Notes] • The box border is ﬁ xed to 1mm (8 dots)

• If the coordinates are reversed, the printer automatically turns the points to create in

any case the box.

• If the x2 is greater than the maximum horizontal width of graphic page, the box is drawn

using the maximum width as last point.

• If the y2 is greater than the maximum length of graphic page deﬁ ned by <LHT...> com-

mand, the box is drawn using the maximum length (deﬁ ned by this command) as last

point.

[Default]

[Reference] <OXY x, y>

[Example] Ticket example that use an empty box

<BV600,50,800,250>

(600, 50)

(800, 250)

SVELTA Emulation

Command Reference 45