Specifications

Given below are more detailed descriptions of each command.
<AFSB x>
Printers: KPM150
[Name] Enable / Disable auto FULL STATUS back
[Format] ASCII <AFSB x >
[Range] ‘0’ ≤ x ≤ ‘9’, ‘A’ ≤ x ≤ ‘F’
[Description] • Enable/disable auto FULL STATUS back.
• x specify the request for FULL STATUS. where x identify the bitmask with the following
table:
4° byte = Unrecoverable error status
3 °byte = Recoverable error status
2° byte = User status
1° byte = Full status
x BIT3 BIT2 BIT1 BIT0
0»0000
1»0001
2»0010
3»0011
4»0100
5»0101
6»0110
7»0111
8»1000
9»1001
A»1010
B»1011
C»1100
D»1101
E»1110
F»1111
[Notes] • Once enable at least one byte of the FULL STATUS, for each change of at least one of
the bits which compose the required status, the status sent in automatic from the printer
will be so composed as follows:
<SB x, CHR1 ..... CHRn>
where:
SB = fi xed characters
x = is the bitmask to identify the request.
CHR1..CHRn = response bytes referred to the following tables:
1° byte = Full status
BIT OFF/ON HEX Decimal FUNCTION
0
Off 00 0 Paper present
On 01 1 Paper not present
1 - - - RESERVED
2
Off 00 0 Paper present
On 04 4 Near paper end
3 - - - RESERVED
4 - - - RESERVED
5
Off 00 0 Ticket not present in output
On 20 32 Ticket present in output
6
Off 00 0 Not virtual paper end
On 40 64 Virtual paper end
7
Off 00 0 Notch found
On 80 128 Notch not found
SVELTA Emulation
42 Command Reference