Specifications

n PRINTING DENSITY
0, 48 - 50%
1, 49 - 37%
2, 50 - 25%
3, 51 - 12%
4, 52 0%
5, 53 + 12%
6, 54 + 25%
7, 55 + 37%
8,56 + 50%
[Notes] • Printing density reverts to the default value when the printer is reset or turned off.
[Default] n = 4
[Reference]
[Example]
$1D $E0
Printers: KPM150
[Name] Enable / disable automatic FULL STATUS back
[Format] ASCII GS { } n
Hex 1D E0 n
Decimal 29 224 n
[Range] 0 ≤ n ≤ 255
[Description] Enable / disable automatic full status back. n specifi es the composition of FULL STATUS
as follows :
BIT OFF/ON HEX Decimal FUNCTION
0
Off 00 0 Disable paper status
On 01 1 Enable paper status
1
Off 00 0 Disable user status
On 02 2 Enable user status
2
Off 00 0 Disable Recoverable Error Status
On 04 4 Enable Recoverable Error Status
3
Off 00 0 Disable Unrecoverable Error Status
On 08 8 Enable Unrecoverable Error Status
4 - - - RESERVED
5 - - - RESERVED
6 - - - RESERVED
7 - - - RESERVED
[Notes] • Once enable at least one byte of the FULL STATUS, for each change of at least one of
the bits which compose the required status, the status sent in automatic from the printer
will be so composed as follows:
1° Byte = 0x10 (DLE)
2° Byte = n
Next bytes (depends how many bits are active in n)
[Default]
[Reference] $10 $04
[Example]
ESC/POS™ Emulation
Command Reference 35