Specifications

• When the LSB of n is 1, the upside-down printing mode is on.
[Notes] • Only the LSB of n is effective.
• This command is valid only if entered at the beginning of a line.
• In upside-down printing mode, the printer rotates the line to be printed 180° and then prints it.
[Default] n = 0
[Reference]
[Example] Upside-down printing Off Upside-down printing On
ABCDEFG
123456
ABCDEFG
123456
↑
Printing direction
$1B $C1 n
Printers: KPM150
[Name] Set/cancel cpi mode
[Format] ASCII ESC { } n
Hex 1B C1 n
Decimal 27 193 n
[Range] 0 ≤ n ≤ 1, 48 ≤ n ≤ 50
[Description] Sets cpi mode based on the following values of n:
n PRINTING MODE
0, 48 Font A = 11 cpi Font B = 15 cpi
1, 49 Font A = 15 cpi Font B = 20 cpi
[Default] n = 0
[Reference] $1B $21
[Example]
$1C $3C
Printers: KPM150
[Name] Change printer emulation to SVELTA
[Format] ASCII FS < S V E L >
Hex 1C 3C 53 56 45 4C 3E
Decimal 28 60 83 86 69 76 62
[Range]
[Description] Change the printer emulation to SVELTA emulation.
[Notes]
[Default]
[Reference]
[Example]
$1C $73 n
Printers: KPM150
[Name] Enable/disable current ticket
[Format] ASCII FS s n
Hex 1C 73 n
Decimal 28 115 n
[Range] 0 ≤ n ≤ 255
ESC/POS™ Emulation
Command Reference 23