Specifications

$1B $76
Printers: KPM150
[Name] Transmit paper sensor status
[Format] ASCII ESC v
Hex 1B 76
Decimal 27 118
[Description] When this command is received, transmit the current status of the paper sensor.
The status to be transmitted is shown in the table below:
BIT OFF/ON HEX Decimal FUNCTION
0,1
Off 00 0 Near paper-end sensor: paper present.
On 03 3 Near paper-end sensor: paper not present.
2,3
Off 00 0 Paper-end sensor: paper present.
On 0C 12 Paper-end sensor: paper not present.
4 Off 00 0 Not used. Fixed to Off.
5 - - - Undefi ned
6 - - - Undefi ned
7 Off 00 0 Not used. Fixed to Off.
[Note] • This command is executed immediately, even when the data buffer is full (Busy).
[Default]
[Reference] $10 $04 n
[Example]
$1B $78
Printers: KPM150
[Name] Select speed / quality mode
[Format] ASCII ESC x n
Hex 1B 78 n
Decimal 27 120 n
[Description] Selects speed / quality mode based on the following values of n:
n FUNCTION
0 Normal mode
1 High speed
[Default] n=0
[Reference]
[Example]
$1B $7B n
Printers: KPM150
[Name] Set/cancel upside-down character printing
[Format] ASCII ESC { n
Hex 1B 7B n
Decimal 27 123 n
[Range] 0 ≤ n ≤ 255
[Description] Turns upside-down printing mode on or off.
• When the LSB of n is 0, the upside-down printing mode is off.
ESC/POS™ Emulation
22 Command Reference