Specifications

• $1D $50 can change the vertical (and horizontal) motion unit. However, the value cannot
be less than the minimum vertical movement amount.
• In standard mode, the vertical motion unit is used.
• The maximum paper feed amount is 520 mm.
[Default]
[Reference] $1D $50
[Example]
$1B $4D
Printers: KPM150
[Name] Select character font
[Format] ASCII ESC M n
Hex 1B 4D n
Decimal 27 77 n
[Range] n = 0, 1, 48, 49
[Description] Selects characters font depending of cpi value set (Char/Inch) as follows :
CHAR/INCH. n FUNCTION
A=11 cpi
B=15 cpi
0, 48 Font 11 cpi (18 × 24)
1, 49 Font 15 cpi (14 × 24)
A=15 cpi
B=20 cpi
0, 48 Font 15 cpi (14 × 24)
1, 49 Font 20 cpi (10 × 24)
[Notes]
[Default]
[Reference] $1B $C1
[Example]
$1B $52 n
Printers: KPM150
[Name] Select international character set
[Format] ASCII ESC R n
Hex 1B 52 n
Decimal 27 82 n
[Range] 0 ≤ n ≤ 10
[Description] Selects the international character set n according to the table below:
HEX 23 24 40 5B 5C 5D 5E 60 7B 7C 7D 7E
n CHARACTER SER
0 U.S.A. # $ @ [ \ ] ^ ` { | } ~
1 France # $ à ° ç § ^ ` é ù è “
2 Germany # $ § Ä Ö Ü ^ ` äöüb
3 United Kingdom £ $ @ [ \ ] ^ ` { | } ~
4 Denmark I # $ @ Æ Æ Å ^ ` æ f å ~
5 Sweden
#
¤
ÉÄÖÅÜéäöåü
6 Italy # $ @ ° \ é ^ ùàòè ì
7 Spain 1 Pt $ @ i Ñ ¿ ^ ` “ ñ } ~
8 Japan # $ @ [ ¥ ] ^ ` { | } ~
9 Norway # ¤ É Æ Æ Å Ü é æ f å ü
10 Denmark II # $ É Æ Æ Å Ü é æ f å ü
ESC/POS™ Emulation
18 Command Reference