Specifications

4 - - - RESERVED.
5
Off 00 0 Acknowledge command
On 20 32 Not acknowledge command error
6
Off 00 0 Free paper path
On 40 64 Paper jam
7
Off 00 0 Notch search ok
On 80 128 Error in notch search
6th Byte = Unrecoverable error status
BIT OFF/ON HEX Decimal FUNCTION
0
Off 00 0 Cutter ok
On 01 1 Cutter error
1
Off 00 0 Cutter cover ok
On 02 2 Cutter cover open
2
Off 00 0 RAM ok
On 04 4 RAM error
3
Off 00 0 EEPROM ok
On 08 8 EPROM error
4 - - - RESERVED.
5 - - - RESERVED.
6 - - - RESERVED.
7 - - - RESERVED.
n=21: transmit printer ID 1st byte= (refer to command $1D $49)
$1B $20 n
Printers: KPM150
[Name] Set right-side character spacing
[Format] ASCII ESC SP n
Hex 1B 20 n
Decimal 27 32 n
[Range] 0 ≤ n ≤ 255
[Description] Sets the character spacing for the right side of the character to [n x horizontal or vertical
motion units].
[Notes] • The right character spacing for double-width mode is twice the normal value. When the
characters are enlarged, the right side character spacing is m (2 or 4) times the normal
value.
• The horizontal and vertical motion units are specifi ed by $1D $50. Changing the hori-
zontal or vertical motion units does not affect the current right side spacing.
• The $1D $50 command can change the horizontal (and vertical) motion unit. However,
the value cannot be less than the minimum horizontal movement amount.
• In standard mode, the horizontal motion unit is used.
• The maximum right side spacing is 255/200 inches.
[Default] n = 0
[Reference] $1D $50
[Example]
ESC/POS™ Emulation
Command Reference 11