SDS

Conforms to OSHA HazCom 2012 Standard and WHMIS
SAFETY DATA SHEET
Page 5 of 13
VersaBond LFT Mortar
6.1 PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT, AND EMERGENCY PROCEDURES
Use personal protection recommended in Section 8. Isolate the hazard area and deny entry to
unnecessary and unprotected personnel.
6.2 METHODS AND MATERIALS FOR CONTAINMENT AND CLEANING UP
Methods for Containment:
Recover all usable material. Pick up large pieces, then place in a
suitable container. Do not flush to sewer or allow to enter
waterways. Use appropriate Personal Protective Equipment (PPE).
Methods for Cleaning-Up:
Vacuum or sweep material and place in a disposal container.
Dispose of unwanted material properly in accordance with all local,
regional, national and international regulations.
Section 7: HANDLING AND STORAGE
7.1 PRECAUTIONS FOR SAFE HANDLING
Handling:
Use in well-ventilated areas. Wear chemical resistant gloves and
eye protection. Do not mix with other chemical products. Do not get
in eyes. Do not get on skin or clothing. Do not breathe fumes. Do
not take internally. Good housekeeping is important to prevent
accumulation of dust.
To prevent burial or suffocation, do not enter a confined space,
such as a silo, bin, bulk truck, or other storage container or vessel
that stores or contains this product.
General Hygiene Advice:
Use good industrial hygiene practices and wear recommended
personal protection. Launder contaminated clothing before reuse.
Wash hands before eating, drinking, or smoking.
7.2 CONDITIONS FOR SAFE STORAGE, INCLUDING ANY INCOMPATIBILITIES
Storage:
Keep out of the reach of children. Keep container tightly closed.
Store at room temperature and keep containers closed when not in
use. Avoid any dust buildup by frequent cleaning and suitable
construction of the storage area. Keep dry until use.
Section 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 CONTROL PARAMETERS
Exposure Guidelines
Occupational Exposure Limits
Chemical Name
OSHA-PEL
ACGIH-TLV
Crystalline Silica, Quartz
0.1 mg/m³
0.025 mg/m³