MSDS

MATERIAL SAFETY DATA SHEET
Sulfamic Acid Cleaner
3 / 6
Section 8: EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure Guidelines
Exposure Limits
Ingredient OSHA-PEL ACGIH-TLV
Sulfamic acid Not available. Not available.
Engineering Controls: Use ventilation adequate to keep exposures (airborne levels of dust,
fume, vapor, etc.) below recommended exposure limits.
Personal Protective Equipment:
Eye/Face Protection: Wear eye/face protection.
Hand Protection: Wear suitable gloves.
Skin and Body Protection: Wear suitable protective clothing.
Respiratory Protection: In case of insufficient ventilation, wear suitable respiratory
equipment.
General Hygiene Considerations: Handle according to established industrial hygiene and
safety practices.
Section 9: PHYSICAL AND CHEMICAL PROPERTIES
Appearance:
Crystals.
Color:
White.
Odour:
Characteristic.
Odour Threshold:
Not available.
Physical State:
Solid.
pH:
1
Viscosity:
Not available.
Freezing Point:
Not available.
Boiling Point:
Not available.
Flash Point:
Not available.
Evaporation Rate:
Not available.
Lower Flammability Limit:
Not available.
Upper Flammability Limit:
Not available.
Vapor Pressure:
Not available.
Vapor Density:
Not available.
Specific Gravity:
Not available.
Solubility in Water:
Complete.
Coefficient of Water/Oil Distribution:
Not available.
Auto-ignition Temperature:
Not available.
Percent Volatile, wt. %:
Not available.
VOC content, wt. %:
Not available.