TDS

RedGard®SpeedCoat®WaterproofingMembrane/TDS312
1 Product Name
RedGard®SpeedCoat®WaterproofingMembrane
2 Manufacturer
Custom Building Products
Technical Services
10400 Pioneer Boulevard, Unit 3
Santa Fe Springs, CA 90670
Customer Support: 800-272-8786
Technical Services: 800-282-8786
Fax: [phone]
Email: [e-mail]
custombuildingproducts.com
3 Product Description
RedGardSpeedCoat®isareadytouse,waterproofingmembranefor
both commercial and residential ceramic and natural stone tile
installations.Suitedforinteriorsubstrates,RedGard®SpeedCoat
creates a continuous waterproofing barrier with outstanding adhesion.
It bonds directly to clean metal, PVC, stainless steel and ABS drain
assemblies.
RedGard SpeedCoat features cross linking moisture cure technology
that produces exceptionally fast curing times (as quick as one hour per
coat). This helps in the ability to flood test and install a shower system
in one day, unlike typical membranes. Its moisture- cure technology
allows it to cure effectively even in cool, damp conditions.
Key Features
Ready to use liquid-applied waterproofing membrane
Exceptionallyfastcuretime–onecoatcuresinaslittleasonehour
Revolutionary cross linking moisture cure technology
Ideal from hot/humid to cold/damp conditions
Listed with IAPMO for use as a shower pan liner
One gallon waterproofs a standard size shower
Coverage for one gallon of RedGard SpeedCoat is the same as 3.5
gallons of traditional waterproofing membranes
CombinewithCUSTOM’sSpeedSlope™RapidSettingSlopingMortar
for a fast track shower tile installation system
Excels on freshly installed mortar beds
Suitable Substrates
Concrete, cement mortar, masonry
Cement Backerboard Units (CBU)
Composition of Product
Reactive polymers with inorganic fillers and pigments.
Benefits of Product in the Installation
Reduces curing time with exceptionally quick-dry formula
One hour cure after final coat before flood test or tile installation
Workseffectivelyin“extremeconditions”ofhighmoistureandcold
weather
Easy to use and is applied by roller or trowel
Rated for extra heavy duty service
Meets Uniform Plumbing Code specifications for use as a shower pan
liner
Can be applied to young concrete
Limitations to the Product
Donotapplybelow40°Forabove90°F
Do not apply over surfaces subject to hydrostatic pressure or standing
water
Do not use to bridge or cover existing expansion, control, construction,
cold or saw cut joints. Refer to EJ171 for treatment of movement
joints.
Do not use as an adhesive.
Donotmixwithotherwaterproofingproducts,includingRedGard®
Waterproofing and Crack Prevention membrane.
Please contact CUSTOM Technical Services concerning use in steam
showers.
Do not use as a wear surface. The membrane must be protected from
construction traffic prior to being covered with tile or other permanent
flooring
Do not use solvents in conjunction with the membrane
DO NOT SPRAY APPLY
Packaging
1 gallon (3.78 L) pail
4 Technical Data
Applicable Standards
American National Standards Institute (ANSI) ANSI A108.01, A108.13,
A118.10
American National Standards for the Installation of Ceramic Tile ASTM
International (ASTM)
ASTM C627 Standard Test Method for Evaluating Ceramic Floor Tile
Installation Systems Using the Robinson-Type Floor Tester
Tile Council of North America (TCNA) TCNA Handbook for Ceramic Tile
Installation, TCNA Method EJ171
RedGard®SpeedCoat®WaterproofingMembrane
Published Date: 4/20/2017