SDS

Conforms to OSHA HazCom 2012 Standard and WHMIS
SAFETY DATA SHEET
8.3 INDIVIDUAL PROTECTION MEASURES
8.3a. Personal Protective Equipment:
i. Eye/Face Protection: Wear approved eye protection [properly fitted dust- or splash-proof
chemical safety goggles/face (face shield)]
ii. Skin Protection:
1. Hand Protection: Wear impervious gloves, such as nitrile.
2. Body Protection: Wear suitable protective clothing
iii. Respiratory Protection: Suitable respiratory equipment is highly recommended in poorly
ventilated areas, or when permissible exposure limit may be exceeded. Respirators should
be selected by and used under the direction of a trained health and safety professional
following requirements found in OSHA’s respirator standard (29 CFR 1910.134) and ANSI’s
standard for respiratory protection (Z88.2).
iv. General Health and Safety Measures: Handle according to established industrial hygiene
and safety practices.
Section 9: PHYSICAL AND CHEMICAL PROPERTIES
Appearance (physical state, color, etc.):
Red Liquid
Odor:
Characteristic
Odor Threshold:
Not available
pH:
Not available
Melting point/Freezing point:
Not available
Initial boiling point and boiling range:
Not available
Flash point:
127°F (52.7°C)
Evaporation rate (Water=1):
Not available
Flammability:
Flammable, Category 3 in accordance to OSHA 2012
Hazcom Standard.
Upper Flammability/Explosive Limit:
Not available
Lower Flammability/Explosive Limit:
Not available
Vapor Pressure
Not available
Vapor Density:
Not available
Relative Density:
1.35 – 1.45 g/mL
Solubility in Water:
Not available
Partition coefficient: n-octanol/water:
Not available
Auto-ignition temperature:
Not available
Decomposition Temperature:
Not available
Viscosity (cps):
Not available
VOC Content:
81 g/L
Section 10: STABILITY AND REACTIVITY
Page 6 of 13
RedGard® SpeedCoat™