Instructions / Assembly

TB91
WATERPROOFING MEMBRANE CREATES A SHOWER IN A DAY
WITH RAPID-CURING SYSTEM
Technical Bulletin
Technical Services 800-282-8786
custombuildingproducts.com
(Continued – Page 2)
Moisture Cure Technology
Unlike traditional waterproofing membranes, RedGard
SpeedCoat’s moisture cure technology will typcially
cure the membrane is less than one hour. The reactive
curing process is not affected by temperature and
humidity variation and the final cure is much more
predictable. Because of its unique composition,
RedGard SpeedCoat does not change color as it
cures. Once it is dry to the touch, it is fully cured and
ready for flood testing and the installation of ceramic
tile.
Because of its thin application rate, RedGard
SpeedCoat coverage per gallon is much higher than
traditional latex-based waterproofing membranes.
When used in conjunction with CUSTOM’s SpeedSlope,
the coverage of one gallon of RedGard SpeedCoat is
equal to 3-½ gallons of a traditional latex- based
waterproofing membrane. Typically, one gallon of
SpeedCoat is all that is needed to fully waterproof a
standard size shower stall.
When used together, SpeedSlope and RedGard
SpeedCoat can prepare a shower in hours rather than
days. After tile is set with a qualifying CUSTOM mortar
and grout, this shower installation system is eligible for
up to a lifetime warranty.
The information in this bulletin is presented in good faith, but no
warranty, express or implied, is given nor is freedom from any
patent in as much as any assistance furnished by CUSTOM with
reference to the safe use and disposal of its products provided
without charge. Custom Building Products assumes no obligation or
liability therefore, except to the extent that any such assistance shall
be given in good faith.
TB91 8/16