Installation Guide

Polyblend®Plus Non-Sanded Grout / TDS-369
Enclose and protect exterior installations and maintain >50° F (10° C)
temperatures for at least 72 hours for proper cure.
Sealing of Grout
Use a pH-neutral, water-based, penetrating sealer such as AquaMix
Sealer's Choice Gold or TileLab Surface Guard.
Cleaning of equipment
Clean tools and hands with water before the material dries.
Health Precautions
This product contains Portland cement. Avoid eye contact or
prolonged contact with skin. Wash thoroughly after handling. If eye
contact occurs, flush with water for 15 minutes and consult a
physician. Use with adequate ventilation; do not breathe dust and wear
a NIOSH approved respirator. If ingested, do not induce vomiting; call a
physician immediately.
Conformance to Building Codes
Installation must comply with the requirements of all applicable local,
state and federal code jurisdictions.
Polyblend®Plus Non-Sanded Grout
Published Date: 5/1/2020