TDS

LevelQuik® Advance ™ Fiber Reinforced Self-Leveling Underlayment for Wood Subfloors / TDS 322
Leveling
LevelQuik® Advance ™ Fiber Reinforced Self-Leveling Underlayment for Wood Subfloors
Published Date: 8/07/2018 - T
1 Product Name
LevelQuik® Advance™ Fiber Reinforced Self-Leveling Underlayment
for Wood Subfloors
2 Manufacturer
Custom Building Products
Technical Services
10400 Pioneer Boulevard, Unit 3
Santa Fe Springs, CA 90670
Customer Support: 800-272-8786
Technical Services: 800-282-8786
Fax: [phone]
Email: [e-mail]
custombuildingproducts.com
customtechflooring.com
3 Product Description
LevelQuik® Advance™ SLU is a high flow, high strength, fiber
reinforced calcium aluminate cement based, self-leveling underlayment
that eliminates the need for reinforcing lath over plywood and OSB on
interior wood framed subfloors. It can produce a smooth or level
substrate ready for the installation of ceramic and natural stone tile,
wood, carpet, and other resilient floor coverings. Formulated with
Controlled Cure Technology™, LevelQuik® Advance™ SLU helps
eliminate installation problems such as slow drying, bond failure,
crumbling, and staining of resilient flooring caused by the free
moisture found in traditional underlayment.
Key Features
No lath required for plywood and OSB subfloors
High strength for 1/4" to 1.5" nominal pours
Low Prep Formula: Clean subfloor, prime & pour
No shot-blasting required on acceptable concrete surfaces
Compatible with most radiant heating systems
Exceeds TCNA and ASTM requirements for ceramic tile and resilient
floor covering installations
High flow formula, has excellent handling and exceptional flow
retention properties
Uses
Suitable as an Underlayment for:
Carpet, hardwood, wood parquet, luxury vinyl tile (LVT), vinyl
composition tile (VCT), Sheet vinyl flooring, Laminated flooring,
Vitreous, semi-vitreous or non-vitreous ceramic tile; mosaic, quarry or
cement body tile; impervious porcelain tile
Natural stone tile
Terrazzo
Suitable Substrates
APA rated ¾” (18mm) T&G Type 1 exterior exposure plywood or OSB
equivalent over 16” joists for most finishes (An additional plywood
layer and/or floor support may be required for dimensionally weaker
finishes such as natural stone, Saltillo, cement and glass tiles.)
Concrete
Primed or prepared gypsum-based underlayment
Existing ceramic tile
Cement terrazzo or epoxy terrazzo
Cutback adhesive residue resilient flooring
Composition of Product
LevelQuik® Advance™ is a proprietary dry blend of copolymers, cements,
and inorganic chemicals and fiber reinforcement.
Benefits of Product in the Installation
No lath required for wood frame and OSB subfloors
No shot blasting required on acceptable concrete surfaces
Can be applied from ¼” to 1.5" thick in a single pour
Reduces bond failure and crumbling of resilient flooring
Cures fast and develops high early-strength for quick installation
Rated for extra heavy use on concrete per ASTM C627
Limitations to the Product
For interior use only
Do not install when the temperature is below 50° F (10° C), or above
90° F (32° C).
Do not bond directly to hardwood, Luan plywood, particle board,
parquet, cushion or sponge-back vinyl flooring, metal, fiberglass or
plastic. Contact technical services for recommendations.
Do not use as a permanent wear surface.
Do not use on sloped surfaces that require drainage.
Precautions should be taken when applying over post-tensioned
concrete, pre-stressed concrete or prefabricated concrete planks.
Contact technical services for further details.