SDS

Conforms to OSHA HazCom 2012 Standard and WHMIS 2015
SAFETY DATA SHEET
Page 5 of 10
Polyblend® Grout Renew
Engineering Controls:
Use ventilation adequate to keep exposures (airborne levels of
dust, fume, vapor, etc.) below recommended exposure limits.
8.3 INDIVIDUAL PROTECTION MEASURES
8.3a. Personal Protective Equipment:
i. Eye/Face Protection: Wear approved eye protection [properly fitted dust- or splash-proof
chemical safety goggles/face (face shield)]
ii. Skin Protection:
1. Hand Protection: Wear impervious gloves, such as nitrile.
2. Body Protection: Wear suitable protective clothing
iii. Respiratory Protection: A NIOSH approved respirator or filtering face piece, such as N95,
is recommended in poorly ventilated areas or when permissible exposure limits may be
exceeded. Respirators should be selected by and used under the direction of a trained
health and safety professional following requirements found in OSHA’s respirator standard
(29 CFR 1910.134) and ANSI’s standard for respiratory protection (Z88.2).
iv. General Health and Safety Measures: Handle according to established industrial hygiene
and safety practices.
Section 9: PHYSICAL AND CHEMICAL PROPERTIES
Appearance (physical state, color, etc.):
Colored Liquid(Various Colors)
Odor:
Characteristic
Odor Threshold:
Not Available
pH:
Not Available
Melting point/Freezing point:
Not Available
Initial boiling point and boiling range:
>212°F(>100°C)
Flash point:
>200°F(>93.3°C)
Evaporation rate (Water=1):
Not Available
Flammability:
Not Flammable/Not Combustible
Upper Flammability/Explosive Limit:
Not Available
Lower Flammability/Explosive Limit:
Not Available
Vapor Pressure
Not Available
Vapor Density:
Not Available
Relative Density:
1.28 – 1.36 g/mL
Solubility in Water:
Not Available
Partition coefficient: n-octanol/water:
Not Available
Auto-ignition temperature:
Not Available
Decomposition Temperature:
Not Available
Viscosity (cps):
Not Available
VOC Content:
~45 g/L(Varies Based On Color)
Section 10: STABILITY AND REACTIVITY
10.1. REACTIVITY