SDS

Conforms to OSHA HazCom 2012 Standard and WHMIS 2015
SAFETY DATA SHEET
Page 4 of 10
Polyblend® Grout Renew
Keep upwind of fire. Wear full fire fighting turn-out gear(full bunker gear) and respiratory protection
(SCBA).
Section 6: ACCIDENTAL RELEASE MEASURES
6.1 PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT, AND EMERGENCY PROCEDURES
Use personal protection recommended in Section 8. Isolate the hazard area and deny entry to
unnecessary and unprotected personnel.
6.2 METHODS AND MATERIALS FOR CONTAINMENT AND CLEANING UP
Methods for Containment:
Recover all usable material. Do not flush to sewer or allow entrance
to waterways. Use appropriate Personal Protective Equipment
(PPE).
Methods for Cleaning-Up:
Dispose of unwanted material properly in accordance with all local,
regional, national and international regulations.
Section 7: HANDLING AND STORAGE
7.1 PRECAUTIONS FOR SAFE HANDLING
Handling:
Use in well-ventilated areas. Wear chemical resistant gloves and
eye protection. Do not mix with other chemical products, except as
indicated by the manufacturers. Do not get in eyes. Do not get on
skin or clothing. Do not breathe fumes. Do not take internally. Good
housekeeping is important to prevent accumulation of dust.
General Hygiene Advice:
Use good industrial hygiene practices and wear recommended
personal protection. Launder contaminated clothing before reuse.
Wash hands before eating, drinking, or smoking.
7.2 CONDITIONS FOR SAFE STORAGE, INCLUDING ANY INCOMPATIBILITIES
Storage:
Keep out of the reach of children. Keep container tightly closed.
Store at room temperature and keep containers closed when not in
use. Protect from freezing. Avoid any dust buildup by frequent
cleaning and suitable construction of the storage area.
Section 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 CONTROL PARAMETER
Exposure Guidelines:
Occupational Exposure Limits
Chemical Name
OSHA-PEL
ACGIH-TLV
Not Applicable
8.2 EXPOSURE CONTROLS