FAQ

Question: I noticed some grout haze on my tile the day after install. How do I remove this?
Answer: Grout haze can be cleaned up with Aqua Mix
®
Grout Haze Clean-Up or TileLab
®
Grout and Tile Cleaner.
For tile and stone sensitive to acid, test the product prior to application.
Question: Does Fusion Pro require a sealer after installation?
Answer: No. One of the major benefits of Fusion Pro is that there is no need to seal the grout. If you decide to use
a sealer, wait seven or more days after Fusion Pro has been installed to ensure it is cured.
APPLICATIONS
Question: Is Fusion Pro’s stain resistance suitable for kitchen and bath applications?
Answer: Yes, Fusion Pro has unsurpassed stain resistance and can resist stains from common household agents
like cooking oil and coffee. It also includes Microban
®
which inhibits the growth of stain-causing mold on
dried grout.
Question: Can Fusion Pro be used in continuously submerged environments like swimming pools and fountains
or in steam rooms?
Answer: No. Fusion Pro is only recommended for use in intermittently wet environments such as showers.
Question: Can Fusion Pro scratch the surface of some tiles?
Answer: Some softer tile surfaces could be scratched. We recommend
testing tiles made of glass, polished stone, metal or other softer
surfaces before using Fusion Pro on a job.
Question: Can Fusion Pro be used for exterior applications?
Answer: Yes. Fusion Pro is suitable for outdoor applications and will
not effloresce.
Question: Can Fusion Pro be used on walls?
Answer: Yes. Fusion Pro can be used on walls and demonstrates excellent
non-sag properties. It adheres well to grout floats for vertical
application.
Question: What are the smallest and largest grout joints where you can
use Fusion Pro?
Answer: Fusion Pro can be used in grout joints as small at 1/16" and as large as 1/2". Do not use Fusion Pro with
irregularly shaped or spaced tile or stone such as pebbles, or where width or depth will exceed 1/2".
Question: Can Fusion Pro be exposed to extremely high temperatures?
Answer: Fusion Pro can be used in normal tile installations. It performs similarly to epoxy and urethane grouts
relative to heat. It is safe to steam clean and pressure wash floors grouted with Fusion Pro. For
commercial kitchens or similar harsh environments, CUSTOM recommends the use of CEG-IG™
Industrial Grade Commercial Epoxy Grout.
CustomBuildingProducts.com
|
800-272-8786
The information in this document is presented in good faith, but no warranty, express or implied, is given nor is freedom from any patent in as much as any assistance furnished by CUSTOM with reference to
the safe use and disposal of its products provided without charge. Custom Building Products assumes no obligation or liability therefore, except to the extent that any such assistance shall be given in good
faith. Product specifications subject to change. Visit CustomBuildingProducts.com for updated technical data sheets and MSDS information.
©Custom Building Products 2015
MICROBAN is a registered trademark of Microban Products Company. FAQFP 3/15R
For additional information, visit CustomBuildingProducts.com/FusionPro, watch the Fusion Pro videos on the
CUSTOM website and YouTube channel or call CUSTOM Technical Services at 800.282.8786.