Specification

Grout / TDS-241
1 Product Name
FusionPro®SingleComponent®GroutDesignerSeries
2 Manufacturer
Custom Building Products
Technical Services
10400 Pioneer Boulevard, Unit 3
Santa Fe Springs, CA 90670
Customer Support: 800-272-8786
Technical Services: 800-282-8786
Fax: [phone]
Email: [e-mail]
custombuildingproducts.com
3 Product Description
FusionPro®DesignerSeriescontainsreflectivecolorpigmentsthat
sparkle and enhance the look of a tile installation. It is a professional
grade grout that features unsurpassed stain resistance with no sealing
required.ItsSingleComponent®formulaisreadytouse,color
consistent and easy to spread and clean. Fusion Pro Designer Series
can be used in commercial and residential environments, interiors and
exteriors, and on walls and floors. Its patented formulation can be
used on all tiles and has built-in Microban antimicrobial product
protection. U.S. Patents 8,349,068, 8,357,238, 8,876,966.
Key Features
Designer-inspired reflective color accents
Stainproof - no sealing required
Easy to spread and clean
Uses
Use to fill joint widths 1/16" to 1/2" (1.6-13 mm)
May be used for both floor and wall installations
Exterior and interior applications.
Commercial and residential applications
Countertops, tub surrounds, showers and high traffic areas
Suitable Tile Types
Vitreous, semi-vitreous or non-vitreous tile: ceramic, mosaic, quarry,
cement body tile
Impervious porcelain and glass tile
Cement-based precast terrazzo
Polished, natural stone
Groutable luxury vinyl tile
Composition of Product
Advanced polymers with inorganic fillers and pigments.
Benefits of Product in the Installation
Stain resistant grout
No sealing required
Ready to use
Hard, durable grout joints
No efflorescence
Crack resistant
MicroBan®antimicrobialproductprotection
Limitations to the Product
Should not be installed when ambient or surface temperature is lower
than50°F(10°C)orabove90°F(32°C).
Some ceramic, glass, marble or stone tiles can be scratched or
damaged by the silica aggregate filler. Perform a test on a small area
prior to use.
Tile or stone with high absorption, surfaces that are porous or rough,
textured surfaces and some types of porcelain tile may require sealing
prior to grouting to prevent possible staining. See the General Surface
Prep section for details.
Do not use Fusion Pro with irregularly shaped or spaced tile or stone,
such as pebble stones, where joint widths or depths exceed 1/2".
Not for use in either industrial applications or in areas subjected to
harsh or continuous chemicals, high heat or high-pressure cleaning.
For heavy industrial tile installations, use CEG-IG 100% Solids Epoxy
Grout.
Not for use over concrete slabs with high moisture emission rates.
Not for use in steam rooms or submerged applications (swimming
pools, spas, water features and fountains).
Not for use in movement joints or changes of plane in the tile
installation. In these areas us an appropriate caulk or sealant such as
Commercial 100% Silicone Caulk or Polyblend®CeramicTileCaulk.
Packaging
Available in 1 quart buckets.
Available in 8 colors.
4 Technical Data
Approvals
Meets the performance criteria of A118.7 and A118.3.
FusionPro®SingleComponent®GroutDesignerSeries
Published Date: 4/28/2015