SDS

Conforms to OSHA HazCom 2012 Standard and WHMIS 2015
SAFETY DATA SHEET
Page 6 of 11
Commercial 100% Silicone Sealant
Evaporation rate (Water=1):
<1 (n-Butyl Acetate=1)
Flammability:
Not Flammable/Not Combustible
Upper Flammability/Explosive Limit:
Not Available
Lower Flammability/Explosive Limit:
Not Available
Vapor Pressure
Not Available
Vapor Density:
>1 (Air=1)
Relative Density:
1.35 g/mL
Solubility in Water:
Insoluble
Partition coefficient: n-octanol/water:
Not Available
Auto-ignition temperature:
Not Available
Decomposition Temperature:
Not Available
Viscosity (cps):
Not Available
VOC Content:
40 g/L
Section 10: STABILITY AND REACTIVITY
10.1. REACTIVITY
No dangerous reaction known under conditions of normal use.
10.2. CHEMICAL STABILITY
Stable under normal storage conditions. Keep dry in storage.
10.3. POSSIBILITY OF HAZARDOUS REACTION
No dangerous reaction known under conditions of normal use.
10.4. CONDITIONS TO AVOID
Heat. Incompatible materials.
10.5. INCOMPATIBLE MATERIALS
Strong oxidizing agents. Water and moisture.
10.6. HAZARDOUS DECOMPOSITION PRODUCTS
This product reacts with water, moisture, or humid air to evolve: Methylethylketoxime. Thermal
breakdown of this product during fire or extreme heat may evolve: Carbon Oxides, Silicon Dioxide,
Nitrogen Oxide, Formaldehyde.
Section 11: TOXICOLOGICAL INFORMATION
11.1. LIKELY ROUTES OF EXPOSURE:
Skin contact, eye contact, inhalation, and ingestion.
11.2. SYMPTOMS RELATED TO PHYSICAL/CHEMICAL/TOXICOLOGICAL CHARACTERISTICS:
Eye Contact:
Causes eye irritation. Symptoms may include discomfort or pain,
excess blinking and tear production, with marked redness and
swelling of the conjunctiva.
Skin Contact:
Causes skin irritation. Handling can cause dry skin, discomfort,
irritation, and dermatitis. May cause an allergic skin reaction.