Installation Guide

8850 N.W. 79th Avenue Miami, Florida 33166 PH 800/826-6852 FAX [phone] www.jamoinc.com
Cleaning
Clean with water before material dries.
Curing & Grouting
Allow to cure for 18 – 24 hours before grouting or light
traffic, depending upon temperature and humidity. Normal
grouting should be done 24 hours after initial set to allow
for proper curing.
Warranty
Manufacturer warrants that should this product prove to
be defective material, it will replace the same or refund
the purchase price of the goods. THIS WARRANTY IS IN
PLACE OF ALL OTHER WARRANTS EXPRESS OR
IMPLIED. WARRANTIES OF MERCHANTABILITY AND OF
FITNESS ARE HEREBY DISCLAIMED. The suitability of a
product for an intended use shall be solely up to the user.
Manufacturer assumes no liability for consequential
damages. Its liability shall in no event exceed the purchase
price of the materials supplied by it. No person has the
authority to change these items and there are no warranties
except herein stated.
Caution
Contains Portland cement. Wear rubber gloves and eye
protection. Avoid eye contact or prolonged contact with
skin. Wash thoroughly after handling. If eye contact occurs,
flush with water for 15 minutes. Consult a physician
immediately.
WARNING! Do Not Breathe Dust! This product contains
Free Silica which may cause cancer or delayed lung injury
(Silicosis). Wear approved respirator in dusty areas. See
Material Safety Data Sheet for detailed information.
KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE
INTERNALLY. STORE IN COOL, DRY AREA.
MULTI-BOND
POLYMER-MODIFIED THIN-SET MORTAR
DSJ011 7/10R
Typical Value
Open Time @ 70° F (21° C) 50 minutes
Adjustability @ 70° F (21° C) 30 minutes
Shear Bond Strength
Non-Vitreous Tile: 7 day 424 psi (29.8 kg/cm
2
)
28 day 508 psi (35.7 kg/cm
2
)
Vitreous Tile: 7 day 210 psi (14.8 kg/cm
2
)
28 day 252 psi (17.7 kg/cm
2
)
SETTING PRODUCTS
Item Code Color Size Package
127131 Grey 50 pounds (22.68 kg) Bag
127001 White 50 pounds (22.68 kg) Bag
Technical Data
O
rdering Information