Manualshelf

User's Manual

ManualsBrandsCUSTOM AUTOSOUND MFG ManualsElectronicsstereo radio with bluetooth
11121314151617181920
CD Changer Operation
This radio is only compatible with the Custom Autosound USA-CD60 6 disc changer or the 1disc
CD1 player.
The CD magazine for the CD60 changer requires the CD’s be loaded with the label facing down. If
you get an error message or the changer can not find the CD please check the loading position of
the CD in the magazine. CD1 loads with label facing up.
1. With CD magazine in changer, Rotate and Release the Left Rear Knob (2)
Clockwise Until CDC is displayed on the LCD.
2. To select a disc press CD up (6) or CD down (7) until the desired disc number is
shown on the LCD display (11).
5. To skip to the next track, turn knob (8) clockwise .To go to the previous track, turn
. . .
knob (8) counter clockwise.
6. To change the mode to another source, Rotate and Release the Left Rear Knob
Clockwise until the desir
ed source is shown on the LCD displ y (11).
TURN
15
Pairing a Bluetooth Device
When connecting a Bluetooth device for the first time，you must first pair the device with
the USA 740.For most devices，pairing only needs to be done once. Please follow these
steps: Make sure the BT (Bluetooth) function is turned "ON" in the rad io Sub-Menu.
See "Sub-Menu System" on page 13.
•Ensure Bluetooth is enabled on the phone to be connected to the unit.
•Search for a new Bluetooth device from the phone (this may take up to 30 seconds).
•Select "CUSTOM AUTOSOND" from the Bluetooth device list.
•Some devices may require you to enter a PIN. If prompted ，enter "0000"for the PIN.
"PAIRING OK" will be displayed on the LCD display if pairing is successful.
The paired device will then connect to the USA 740 automatically.
Making a Call
1. Dial the desired number on the paired mobile phone.
2. Once dialing is in progress, “CALLING” will be displayed on the LCD.
3. When the call is in progress, “TALK” will be displayed on the LCD, along
with the elapsed call time (TALK 00:00).
Receiving a Call
1. If a call comes in, audio playback from the current source will either be
muted or paused (depending on the source) and “PHONE IN” will be shown
on the display, along with the Caller ID, if it is enabled by the phone/carrier.
2. Turn the left rear knob counter-clockwise to accept the call.
Ending a Call
To end the call, turn the left rear knob counter-clockwise to end the call.