User's Manual

10
Adjusting the sound properties:
1. Press the right front knob, then release, to access the sound properties menu.
2. Repeatedly press and release the front right knob to scroll through the
available menu options.
3. Turn the left front knob right or left to select a value for the chosen menu
option.
4. Press and release the right front knob repeatedly to move to the next function
desired, or do nothing
and the menu will revert to the current source display.
EQ SETTING
When you first access this menu, EQ is set to OFF, Turn the left front knob to view and
select from the 5 preset equalizer options.
FLAT setting offers sonic adjustments that lend themselves to classical
music.
CLASSIC setting offers sonic adjustments that lend themselves to classi
cal music.
POP setting accentuates the bass and treble se
ttings. This is suitable for
bass heavy popular music.
ROCK setting accentuates the treble settings. This is suitable for rock
music.
BASS / MID / TREBLE selections do not come up when the EQ is set to anything other
than OFF.
B
ASS
The bass adjustment function
allows you to boost or cut the low
frequencies from -12 to +12.
M
ID
The mid-range adjustment function
allows you to adjust the middle
frequencies -12 to +12.
T
REBLE
The treble adjustment function
allows high you to boost or cut the
high frequencies from -12 to +12.
b
alance
The balance adjustment function
allows you to adjust or pan the
stereo sound from the left or right,
This position or the driver in relation
to the speakers. Adjustment range
is 0-20 between the left and right
speakers.
9
Slidebar Manual_new_USA-5_manual_peter 1/23/2014 9:20 AM Page 10
FADER
The fader control allows you to fade
the sound from the front pair of speak-
ers to the rear pair of speakers.
Adjustment range is 0-20 between
front and rear speakers.
Loudness
This function boosts bass and treble
according to the volume. You will know
this function is active when you see
“LOUD” on your display. This function
boost bass and treble for low listening
volume and should be turned off at
hi
gher volumes.
SUB ON/OFF
Turn the subwoofer RCA output ON to
activate this feature.
SUB VOL
When SUB ON is selected and a sub-
woofer is attached to the sub out RCA,
use this function to increase or
decrease the volume level of the sub-
woofer outputs from 0-12.
SUB (55h / 85h / 120h / 160h
When SUB ON is selected and a sub-
woofer is attached to the sub out RCA,
use this function to adjust the sub-
woofer cros
sover point to 55HZ, 85HZ,
120HZ or 160HZ. Use the left knob for
adjustment.
BASS / MID / TREBLE X-Over This Menu does not come up when the EQ is set to
anything other than OFF.
BASS
Use this function to make a more
detailed boost or cut adjustment of
bass (low) frequencies as fol-
lows:60/80/100/120Hz.This is a very
useful mode for making very specific tonal adjustments. When selecting one of these
60/80/100
/120Hz points, any changes to the prior BAS Menu settings on page 10 (-12 to
+12) will boost or cut at the selected frequency setting chosen in this menu.
PRESS
TURN
PRESS
TURN
PRESS
TURN
PRESS
TURN
PRESS
TURN
PRESS
TURN
PRESS
TURN
PRESS
TURN
PRESS
TURN
PRESS
TURN
PRESS
TURN