Owner`s manual

Specifications
Inputs
Analog Inputs (two 3-pin/1/4 in TRS connectors on rear panel)
Line Level:
–10dBu (consumer) to +4dBu
Microphone Level:
Mic amp gain range 12-65 dB.
Instrument Level:
Instrument input impedance is 2.2MΩ.
Digital Input (USB connector on rear panel)
USB
USB Audio from computer available at resolutions up to 24-bit and sample rates up to 48 kHz.
Outputs
Analog Output
Headphones (1/8 in mini stereo headphone jack on rear panel):
0.3 Watts/Channel RMS out.
Digital Outputs
AES/EBU (male XLR on rear panel):
Sample rates from 44.1-96 kHz
Resolutions of 16, 20 and 24-bit.
(16 and 20 bit resolutions available only at 44.1 and 48 kHz sample rates)
Single-wire operation at 88.2 and 96 kHz
Digital black
S/PDIF (female coaxial connector on rear panel):
Sample rates from 44.1–96 kHz.
Resolutions of 16, 20 and 24-bit.
(16 and 20 bit resolutions available only at 44.1 and 48 kHz sample rates)
Single-wire operation at 88.2 and 96 kHz.
Digital black
USB Audio (USB connector on rear panel):
For use with a USB-capable computer
running a supported operating system and software application.
Sample rates up to 48 kHz.
Resolutions up to 24-bit.
Dynamic range 105 dB
THD+Noise –94 dB
Sample rates 44.1–96 kHz ±10%
Freq. Response 20 Hz – 20 kHz ±0.2 dB @ 44.1 kHz Fs
Inputs
Mic/line (XLR), instrument (TRS) (universal skts)
Min/Maximum input level (CAL/LINE) –6/28 dBu
Mic amp gain range 12–65 dB
Mic input impedance 1.2 kΩ
Line input impedance 10 kΩ
Instrument input impedance (1/4in connector) 2.2MΩ
Digital interfaces USB Audio I/O, AES/EBU, S/PDIF
Headphone monitor 0.3W/channel RMS out, 1/8in jack
Power input 6-16 v dc, 5.5W
Power supply External, universal voltage in, 12v dc out
USB power Derived from interface
Size (w x d x h) 5.4in x 9.8in x 1.5in
Weight 2 lb
Mini•Me User’s Guide
Page 26