Specifications

1 - 7
SAFETY
Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
1
SEAT BELTS
Always operate the vehicle with seat belts properly fastened.
Be certain the seat belts are latched securely and are free from twists.
Position the shoulder belt across the top of the shoulder. Do not place the shoulder belt under an
arm.
Loose fitting safety belts significantly reduce protection. Keep belts snug and positioned low on
the hips.
Do not exceed the recommended number of occupants for the vehicle;
Bucket seats are designed for one occupant only.
The driver and all passengers must wear seat belts, one person per belt. The two-passenger LSV 800 has two bucket
seats and is equipped with two safety belts, one for the driver and one for the passenger. The safety belts must be used
at all times while operating the vehicle.
This vehicle has not been tested for use with automotive style child safety seats or booster seats.
Do not use automotive style child safety seats or booster seats with this vehicle.
Inspect the safety belt webbing and hardware periodically. Check for cuts, frays or loose parts. Replace components
if excessive wear or damage is noticed.
Keep safety belts clean and dry. To clean, use mild soap and warm water. Do not use bleach, dye or abrasive clean-
ers as this will weaken the belt webbing material.
Do not insert any foreign objects into the retractor mechanism.
Periodically check for smooth operation and replace if the mechanism is not operating properly.
Pregnant, disabled, or injured persons should consult their doctor for specific recommendations before using the
LSV 800.
Seat Belt Operation
To properly secure the seat belts, pull the metal tab out away from the retractor and insert into the appropriate buckle
located near the center of the seat. A click will be heard when the tab is securely latched. Position the lap belt as low as
possible on the hips, not the waist. Properly adjust and ensure a snug fit by pulling the shoulder portion upward.
The retractor will lock the belt during sudden stops. It may also lock if the person leans forward too quickly. Slow, easy
motions will allow for free travel.
To release the safety belt, press the buckle release button and allow the belt to retract. If the belt does not retract,
check for twists.