User Guide

A. Installing on a concrete wall

3.1 To remove the mounting plate 3.2 Installing the mounting bolts properly

Unscrew the screws on the back of the main Determine where the bolt holes will be

using body to remove the mounting plate. the mounting plate and pour epoxy

3.3 When the epoxy 3.4

to the following diagram). Clamp it as shown.

Install the main body

has cured install the mounting Set the main body onto the upper

plate(secure the plate according end of the mounting plate and

B. Installing on a wooden wal1

40-50mm

70 mm

13-15mm

Concrete

Mountin

Plate

Washer

3.5 Fix the

mounting

plate in the pre-

measured position

with tapping screws

3.6 Same as in step 3.4 2 inches is the required

distance from the ceiling

into the bolt holes.