Programming instructions

ManualsBrandsCurtis ManualsCoffee MakerPCGT3

Steps to Programming

our Curtis our Curtis

our Curtis

ADS System is FADS System is F

ADS System is F

actoractor

actor

y Pre-Set fory Pre-Set for

y Pre-Set for

Optimum Performance. Usually this Does NotOptimum Performance. Usually this Does Not

Optimum Performance. Usually this Does Not

Change.Change.

Change.

Entering the Programing MenusEntering the Programing Menus

Entering the Programing Menus

Press and hold

STOP/WASHSTOP/WASH

STOP/WASH for five [5] seconds. Display will

read

Program MenusProgram Menus

Program Menus,(See Illustration).

Manual DispenseManual Dispense

Manual Dispense

Press  or > to go to

Manual Dispense SelectManual Dispense Select

Manual Dispense Select.

Press  to go to

Manual Dispense Select StationManual Dispense Select Station

Manual Dispense Select Station.

Choose the station and press, the display will read

SavingSaving

Saving

Complete!Complete!

Complete! To select another station for manual dispense,

press  to go to

Manual Dispense Select StationManual Dispense Select Station

Manual Dispense Select Station or press > to continue to the next menu.

Dispense By Dispense By

Dispense By

imeime

ime

The next screen is

Dispense By Dispense By

Dispense By

ime < Select >ime < Select >

ime < Select >. Press  to select a station. Select the station and the screen will read

o Begin Push Starto Begin Push Start

o Begin Push Start.

Press desired dispense button. Hot water will start to dispense and screen will display

o Fo F

o F

inish Push Stop.inish Push Stop.

inish Push Stop.

When

Push Push

Push is pressed, time will be saved

and you will exit back to

Dispense by Time Dispense by Time

Dispense by Time screen. Continue with additional selections or press > to continue to the next menu.

emperaempera

empera

ture (Fture (F

ture (F

actoractor

actor

y set 19y set 19

y set 19

0°

F)F)

Press  and screen will show Tank Temperature. Temperature is programmable from 170°F to 204°F in 2-degree increments. Press < or > to go up or

down in degrees. Select desired temperature and then to set. Press > to continue to the next menu.

Powder % RatioPowder % Ratio

Powder % Ratio

Press  and the screen will display

Powder % Ratio Select StationPowder % Ratio Select Station

Powder % Ratio Select Station. Press desired station. Powder ratio is programmable from 0% (Hot Water) to

100%, in 5% increments. Press

< <

< or

> >

> to increase or decrease ratio and then press  to set. Press > to continue to the next menu.

Service Call (Phone number)Service Call (Phone number)

Service Call (Phone number)

Press  to display number and press  change number or

> to move places and EX to exit when complete This number will be displayed during a

Heating system SENSOR ERROR or a WATER ERROR. Press > to continue to the next menu.

Banner NameBanner Name

Banner Name

Press  to display letters, press  to change letters or

> to move places and

EXEX

EX to exit when complete.

This feature allows up to 14 letters to be programmed for company name or regional name. Programming all blanks disables Banner Name. If pro-

grammed, Banner Name is displayed every 5 sec. on and off. Press > to continue to the next menu.

Model SelectModel Select

Model Select

Press  to select,

< or

> >

> to select desired model (PC-1, 2, 3, 4, 5) . Press  to set and exit program mode.

ExitExit

Exit

Press  to select, exits program mode and returns unit to operation.

Program Menus

Select

PROGRAMMING SELECTIONS

Illustrated Parts List

CA-1047

CA-1051-03

WC-2626-03

CA-1012-05

CA-1024-05

WC-43791

CA-1010-05

CA-1008-05

CA-1006-05

CA-1013

CA-1036

WC- 826

CA-1014-05

CA-1030-05

WC-3765

WC-39350-02

WC-39203

WC-8591

WC-7349

WC- 780

WC-8556

Nº

Part NPart N

Part Nº

DescriptionDescription

Description

AUGER, WIRE PCs & PCGTs

SOCKET, GEAR

BUSHING, AUGER PC/CK/HC

MOTOR, WHIPPER

PILLAR, LOCATION BLACK (NOT SHOWN)

RING, MOTOR SHAFT (NOT SHOWN)

PLATE, WHIPPER CHAMBER OPEN W/SEAL

PROPELLER, WHIPPER PCGTs

WHIPPER CHAMBER

GEAR MOTOR

GEAR, PLASTIC USE ON CA-1013

VALVE, INLET

FAN, EXTRACT 120V 29 CFM 115V 60HZ

HOSE AIR (NOT SHOWN)

KIT, INLET VALVE REPAIR USE ON WC-826

LABEL, PANEL FLAVOR CURTIS

LABEL, SERVICE & PROG (NOT SHOWN)

CAPACITOR, X2 ALL ADS MODELS

PANEL, RIGHT SIDE PCGTs

CONTROL, POWER MODULE PCGT 120V

HEAT SINK ASSEMBLY (NOT SHOWN)

19A

20A

21A

21B

28A

WC-5502-01

WC-3734

WC- 904

WC-1438-101

WC- 523

WC- 102

WC-68131

WC-68130

CA-1099

CA-1105

CA-1112-05

CA-1113-05R

CA-1113-05L

CA-1011-05

CA-1065-03

CA-1026-03

CA-1005-03

CA-1009-03

CA-1037-8

CA-1002

WC-5664-05

Nº

Part NPart N

Part Nº

DescriptionDescription

Description

PROBE ASSY, WATER LEVEL

KIT, RPL DUMP VALVE FOR WC-880E

HEATING ELEMENT, 1.6KW W/JAMNUTS

SENSOR, TEMERATURE TANK

THERMOSTAT, MNL RESET 120/240V 25A

SWITCH, TOGGLE NON LIT 25A 120/240V

SCREEN, DRIP TRAY PCGT-3

SCREEN DRIP TRAY PCGT-4/5

DRIP TRAY, PLASTIC PCGT-3

DRIP TRAY, PLASTIC PCGT-4/5

CANISTER ASSY, 5LB PCGTs

CANISTER ASSY, 10LB RIGHT PCGTs

CANISTER ASSY, 10LB LEFT PCGTs

FITTING, BULKHEAD WATER

BUSHING, DISCHARGE

ELBOW, PC/CK/HC

STEAM TRAP

BOWL, MIXING

TUBE, EXTENSION .714 OD x3.4 YELLOW

LID, CANISTER, 5LB ROUNDED CORNERS

LID, CANISTER, 10LB PCGT’s

PANEL, LEFT SIDE PCGTs

DOOR,/WINDOW SUPPORT ASSY, PCGT-3

DOOR/WINDOW SUPPORT ASSY, PCGT-4/5

WINDOW, FRONT CLEAR PCGT-3

WINDOW, FRONT CLEAR PCGT-4/5

FILM, CURTIS LOGO PCGT-3

FILM, CURTIS LOGO PCGT-4/5

LAMP COMPLETE, W/5K BULB

CONTROL MODULE, PCGT-1/2/3/4/5 120V

LABEL ASSY, UCM & DOOR PCGT-3

LABEL, UCM PANEL PCGT4 CURTIS

LABEL, UCM PANEL PCGT5 CURTIS

MEMBRANE CNTRL PNL CURTIS PCGT4

MEMBRANE CNTRL PNL CURTIS PCGT5

COVER, ALCOVE PLASTIC PCGT-3

COVER, ALCOVE PLASTIC PCGT-4/5

COVER, ALCOVE PLASTIC PCGT-5

COVER, DRIP TRAY PLASTIC PCGT-3

COVER, DRIP TRAY PLASTIC PCGT-4

COVER, DRIP TRAY PLASTIC PCGT-5

LID ASSY, TANK

10A

10B

11A

11B

WC-7348

CA-1097

CA-1103

CA-1101

CA-1107

CA-1109-01

CA-1110-01

CA-1117

WC- 778

WC-39349

WC-39350-01

WC-39351-01

WC-39350-04

WC-39351-04

CA-1098

CA-1104

CA-1115

CA-1100

CA-1106

CA-1114

WC-5661

Nº

Part NPart N

Part Nº

DescriptionDescription

Description